高效過濾器在清理及其拆換實際操作維護保養：

Actual operation and maintenance of high efficiency filters during cleaning and removal:

1、高效送風口氣旋速率降至更低底限或排風量為原排風量的70%時，拆換中效過濾器、中效過濾器及調整靜壓箱電動風閥仍不奏效時，還應拆換。

1. When the cyclone rate of the high-efficiency air supply outlet drops to a lower bottom or the exhaust volume is 70% of the original exhaust volume, the removal of the intermediate-effect filter, the intermediate-effect filter and the adjustment of the static pressure box electric air valve are still ineffective, they should also be replaced.

2、務必在生產車間停工、空氣凈化系統發電機組終止運作狀況下拆換。

2. Must be removed when the production workshop is shut down and the generator set of the air purification system is terminated.

3、高效過濾器更換后，經撿漏合格，方可投入使用。

3. After replacing the high-efficiency filter, it can be put into use only after it is qualified for leak detection.

4、高效送風口散流板的清理：將高效送風口散流板螺絲松掉，拆下來散流板，將散流板擦洗整潔后，裝回原部位。

4. Cleaning of the high-efficiency air supply outlet diffuser: loosen the screw of the high-efficiency air supply outlet diffuser, remove the diffuser, clean the diffuser and return it to its original position.

5、高效送風口的維護保養：當浮塵物體數檢驗出現不過關狀況，確定是由高效送風口泄漏導致時，應按《高效送風口幸運安全操作規程》實際操作，找到泄漏點。邊框泄露則將固定螺絲旋緊。過濾器表面泄露，可將密封膠密封泄露點。泄露點過多無法修復時，應更換。

5. Maintenance of high-efficiency air supply outlet: When the number of floating dust objects fails to pass the inspection, it is determined that the leakage is caused by the leakage of high-efficiency air supply outlet, the leakage point should be found according to the "Lucky and Safe Operation Rules for High-efficiency Air Supply outlet". When the frame leaks, the fixing screw is tightened. Leakage point of sealant can be sealed by leakage of filter surface. If the leakage point is too much to repair, it should be replaced.

6、更換高效過濾器時拆下散流板，松掉緊固螺母，將原高效過濾器拆掉，將新高效過濾器裝上，擰緊螺母，裝上散流板。

6. Remove the diversion plate, loosen the fastening nut, remove the original high-efficiency filter, install the new high-efficiency filter, tighten the nut and install the diversion plate.

7、高效過濾器記錄：填寫空調過濾器清潔更換記錄。

7. High-efficiency filter record: Fill in the clean replacement record of air-conditioning filter.

其次，挑選高效送風口也必須要留意到材料的難題，如今的過濾器材質總有許多，像鍍鋅鋼板、不銹鋼板材、鋁型材等許多的材料，這種材料具體在應用的那時候也會各不相同的功效，當然在不同的場合使用的時候也就需要不同的材質，這一點企業在選擇的時候也是很慎重的，畢竟高效過濾器的材質如果不好在實際使用的時候也會影響到產品的質量，進而在挑選的那時候也必須要留意到材料的難題，另外還要按時開展維護保養，終究這類高效送風口在過慮的實際效果上是很高效率的，因而按時的維護保養還是十分必須的。

Secondly, it is necessary to pay attention to the problem of material selection for efficient air outlets. Nowadays, there are many materials for filters, such as galvanized steel sheet, stainless steel sheet, aluminium profile, and so on. This material will have different effects when it is applied. Of course, different materials are needed when it is used in different occasions. This is also the case when enterprises choose. It's very prudent. After all, if the material of the high-efficiency filter is not good, it will also affect the quality of the product when it is used in practice. Therefore, at the time of selection, we must also pay attention to the problem of the material. In addition, we must carry out the maintenance on time. After all, this kind of high-efficiency air supply outlet is very efficient in the actual effect of consideration, so the maintenance on time is very necessary.
http://www.696954.cn